Tricool Thermal Air Blast Fluid Coolers

Tricool Thermal manufacturer a wide range of air blast coolers including: Compact Fully Packaged, Flat Bed & ‘V’ Block Fluid Coolers for Industrial Applications

Applications that these systems are suitable for include:Induction Furnaces, High Frequency Generators, Quench Cooling,Welding Equipment, Compressor Cooling, Electronic Enclosures, Hydraulic Oil Cooling, General Industrial Cooling

The advantages of a Tricool Thermal Closed Circuit Air Blast Fluid Cooler:

A reliable supply of uncontaminated cooling fluid is of major importance to many manufacturing processes. Rising water changes and increasing environmental pressures affect both production costs and efficiency to overcome these factors closed circuit cooling is the only answer.

Tricool Thermal have designed and supplied closed circuit cooling equipment to industries in the UK and overseas for the past 30 years. The customised range of air blast fluid coolers are economic, efficient and assure the integrity of the water supply.

Fully Packaged Air Blast Fluid Coolers

Tricool Thermals standard range of Air Blast Coolers feature non-ferrous water system as standard, however, these can be provided with alternative materials to meet specific process requirements.

Units also feature: Diagnostic Fault Indication, Split or totally packaged system, Guaranteed specification, Light weight, corrosion-free enclosure, Low noise level fans, High efficiency heat exchangers.

The benefits of these units are: Clean corrosion-free process fluid, Low operating costs, No evaporation loss, Anti-freeze facility for external units, No water treatment costs, No chemical dosing, Low maintenance costs

To customise this range to suite your exact specification the following options are available:

• Split Coils
• Automatic Mains Fill for Internal Units
• Remote Stop/Start Facility
• Level Switch
• Flow Switch
• Pressure Switch
• Air Inlet Filters
• Variable Speed Fans
• High Pressure Pump

Flat Bed Air Blast Fluid Coolers

Tricool Thermal Flat Bed Air Blast Fluid Coolers are designed around a well-proven format which is customised to satisfy specific customer requirements and is primarily for external location using an anti-freeze/water solution for frost protection.

These units feature:

• 15.0 – 600.0kW Cooling Capacity with standard format
• Low silhouette for roof mounting
• Low noise level fans (energy-saving individual thermostat control available)
• Robust weather-resistant construction
• High level of heat recovery when sited internally
• Open & fully closed circuit designs
• Available as separate cooling unit or as part of complete system
• Designed to compliment Tricool Thermal Pumping Sets when remotely sited (see companion product below)

Tricool Thermal flat bed air blast fluid coolers offer the same benefits as standard Fully Packaged Air Blast Fluid Coolers with the advantage of complete flexibility in siting and the backing of ICS Cool Energy Ltd. turn-key installation package.

‘V’ Block Air Blast Fluid Coolers

Tricool Thermal ‘V’ Block Air Blast Fluid Coolers are designed around a well-proven format which is customised to satisfy specific customer requirements and is primarily for external location using an anti-freeze/water solution for frost protection.

These units feature:

• 15.0 – 1,500.0kW Cooling Capacity with standard format
• Dual condenser in a ‘V’ configuration allowing 50% available cooling even if one condenser coil block requires repair/replacement
• Low noise level fans (energy-saving individual thermostat control available)
• Robust weather-resistant construction
• High level of heat recovery when sited internally
• Open & fully closed circuit designs
• Available as separate cooling unit or as part of complete system
• Designed to compliment Tricool Thermal Pumping Sets when remotely sited (see companion product below)

As with the flat bed air blast fluid coolers the added benefit of these units is complete flexibility in siting and the backing of ICS Cool Energy Ltd. turn-key installation package.

Flat Bed & ‘V’ Block Air Blast Fluid Cooler

Available Options:

• Remote Stop/Start Facility
• Flow Switch
• Pressure Switch
• Air Inlet Filters
• Variable Speed Fans
• Adiabatic Spray System (for reduced process fluid supply temperatures)
  

Technical Data

Tricool Thermal Fully Packaged Air Blast Fluid Coolers are constructed to the following standard specification, however, completely bespoke units with alternative materials of construction can be designed & manufactured to suit the environmental conditions and customer requirements.

• Designed for indoor or outdoor siting, stand-alone or built into OEM assembly, split system or fully packaged. Full diagnostics as standard.

• Pumps: Stainless steel centrifugal pumps are used throughout the range. Flow and pressures can be varied to suit customer’s requirements.

• Fans: High efficiency axial flow fans. Low noise is used where feasible

• Heat Exchangers: Copper tube with aluminum fin matrix. Selected to provide optimum heat transfer capability, efficient cooling and low pressure drop.

• Water System: Temperature and pressure gauges fitted as standard. Overflow, manual/automatic fill and BSP Female connections for flow and return cons up to and including 2” and PN16 Flanged connections for flow and return cons above.

• Electrical Control System: The IP55 electrical enclosure forms part of the Fully Packaged Air Blast Fluid Cooler & contains all necessary starters, control gear including ru/fault status lights, temperature displays and the stop/start push buttons. Normally all units require a 400v-3ph-50Hz + E electrical supply, however, 230v-1ph-50Hz + E units available upon request. Remote control panels are offered as an alternative and will incorporate individual fan isolators at the unit.

• Enclosure: Light zintec/galvanised steel. Welded main framework. Flush panels fitted with stainless steel screws. Powder coated finish, standard colour RAL 5010, blue (other colours and types of paint available at extra cost)

For more information on Bespoke Fully Packaged Air Blast Fluid Coolers please contact Tricool Thermal Sales Office on 0800 977 5709.

Companion Product

Tricool Thermal Industrial Pumping Sets:

Custom-designed to meet the cooling needs of a wide variety of manufacturing processes, they combine a standard, compact, packaged design with a wide range of options. This ensures maximum economy, while meeting customer’s specific needs.

Tricool Thermal pumping sets can be used in conjunction with remotely sited to Tricool Thermal flat bed 'V' Block standard/ Adiabatic air blast fluid coolers to provide the necessary flow, pressure and control of the fluid to the equipment being cooled. Both open and closed circuit options are available.

For more information on Pumping Sets please contact Tricool Thermal Sales Office on 0800 977 5709